Related posts:

1. Small Skull
2. Skull Beads
3. Paper Mache

It rained, hard… I already posted a few rainy pictures. The props all held up fantastically, no paper mache fatalities thanks to sealing everything. Though I live on the Canadian west coast so we expect it to rain here.

Related posts:

1. October 31st…. RAIN
2. Zombie Crawler
3. Halloween Tree

This project began with a polyurethane skull, but I cut it and carved at it so much I might as well not have used it to begin with. Pulp mache base and some Paperclay on the main face features. This is the first project I’ve applied Paperclay to. I have to say, it sure is nice to work with.

Related posts:

1. Mr. Hemlock Dench
2. Halloween Tree
3. Zombie Crawler

I had sculpted her face last year before Halloween, and then she sat in the basement… bald, grumpy, and only half a body… collecting dust for MONTHS. Originally I thought I might make 3 of these hags, and this one was going to be leaning on her broom. Then while camping one of my kids found a nice walking stick and we decided to bring it home for the hag to use.

I didn’t take many picture of her as I made her. Her face was pink because of the mache pulp I was using.

Related posts:

1. Mr. Hemlock Dench
2. On the ‘Work Bench’
3. Halloween Tree

I sculpted a head for it recently.

I will make it some hands later today as I want to take it to a local Halloween gathering this weekend. Before Halloween I’ll probably add some sculpted arms, but for now he can wear a long sleeve shirt. I’ll post the finished crawler at some point.

Quick run down on how it was made:
Cast a foam skull
Carve a foam skull, adjust jaw line
Paper mache basic form, let dry
Add pulp mache, let dry
Apply a sealant to mache
Paint
Apply finish sealant
Add some hair.

Related posts:

1. Halloween Tree
2. Mr. Hemlock Dench
3. On the ‘Work Bench’

Mr. Hemlock Dench is my cemetery grounds keeper or caretaker.
He is a knavish, creepy little man. Bow-legged and hunch-backed, he grins fiendishly out into the darkness at passers by….

Mr. Dench was my first project for 2007. This was the first full bodied prop I attempted. He is made almost entirely of recycled materials.

Making Hemlock Dench

I made Hemlock to enter in the $20 Dollar Prop Contest on HauntForum for 2007, so I had to keep cost in mind while building. Building a prop with 20 dollars worth of supplies is easier said than done. You can find yourself creatively limited and rethinking your design to accommodate the price.

I began with the face, using a foam skull I had made years previous. These skulls are easy to make and very cheap.

I decided the most cost effective way to tackle this was to mold a face around the skull, and make a mache mask casting. This way when forming the face I wouldn’t need to use as much paper mache pulp to build up the face features, and cut costs.

I covered the entire skull in tin foil, to keep anything from sticking to it. Then I used plasticine to form a rough face. I put a plastic bag over the face and applied a few layers of basic paper mache over it to form my mask. After it had dried thoroughly I removed it.

Then I removed the plastic bag, gave my son back his Plasticine, and stripped the tin foil off the foam skull, setting it aside for the eyes.

Next I took a very sharp knife and cut the lower jaw off the foam skull. I carved out all the spaces between the teeth on the upper and lower jaw and knocked out a few.

I painted the teeth and gums. After I was satisfied with the paint I added a thin coat of Spar Varnish. Next I made a tongue to fit inside the lower jaw out of masking tape and paper mache. I didn’t know if I was going to have the tongue showing at all, but I thought I might as well add it just in case. It only took a few minutes to form. I painted it with the same paint as the gums.

Eyes.
Cheap eyes. I made polymer clay eyeballs. The insides of each eye were the left over tin foil from the skull.

Next I cut out the sockets and put together -skull, teeth and mask over top, it wasn’t sitting quite right. So I shaved off some of the bone structure of the skull, and everything fit better.

Then I taped together everything I had made. Once secured, I added coarse mache pulp to build up the face features, and then used a finer mache pulp to get some detail. This process took some time, as each layer had to be left to dry thoroughly. My main tools: my fingers, and a bamboo skewer.

I added ears using tin foil and masking tape and more mache pulp. Once I had the basic shape of ears, I taped them into place, and then built up the detail using pulp mache.

The Hands.
This was a 20 dollar prop – so I had to figure a way to make hands for very cheap. I used packing peanuts because I happened to have some from a package I received in the mail. I taped them together to form the shape of hands, using 5 pieces of florists wire cut in half, one for each finger. I secured a 45 degree PVC elbow joint at each wrist. Then I used my mache pulp to build up the hands. This was done over a few sessions, as the mache needed time to dry between applications.

I formed a body from PVC. With my heat gun I warped his back to give him a hunch and his legs to make him bow legged. After tinkering with his stance a little I secured his limbs and positioned his head. Then I added some mache to form his neck. And bulked out his body with newspaper, bags and masking tape. I coated his body with a thin layer of mache and blended his neck and arms in with the remaining mache pulp.

Then I painted him. I use mostly acrylic paint from the mis-tint section of hardware stores, its very cheap. To these I add other acrylic paint to get the base colors I want, and I free hand mix the rest as I go.

Clothing
I made his pants and shirt from rags and some filter cloth. I tied the shirt material on, it’s a big knot on the back, and his pants are basically tubes formed from black filter clothe, which I then stapled together… pretty low tech. His jacket was from my own Halloween costume a few years ago.

His hair was originally part of a witch’s hat that did not survive our 2005 party. His eyebrows were made from a cheap disposable paint brush. Gluing hair on is not my idea fun… I almost left him bald.

His lantern was scrounged from my mother in laws basement while she was doing some early spring cleaning. I added some paint to tarnish it up. Before Halloween I will redo his lantern to remove the real flame and make it safe, but for the 20 Prop Challenge it has to stay as is because of cost.

I was walking out back to find a stick for him to hold, and passing the fire pit I saw that my spouse had broken a rake, and the top of the handle was in the burn pile. I brought it up to the house and cut it to size.

Definitely helped finding trash to incorporate into this project! I’m happy with how my new repulsive grounds keeper turned out.

On a personal note…
Thank you to Kurt for naming him and constantly telling me to get off my a$$ and make a prop.

Related posts:

1. Halloween Tree
2. Zombie Crawler
3. Paper Mache

I wanted to add some sort of small creatures to my witch kitchen display in 2006 that wouldn’t necessarily take up floor space…as I don’t have any to spare.
I made four winged demons, the largest being almost 3′ across. Each is constructed from recycled paper and wire, and can be hung on the wall so as to take up very little space.

Want one of your own? I may periodically have new ones for sale in my shop.

Related posts:

1. Hag
2. Halloween Tree
3. Mr. Hemlock Dench

Basic Mache

This is my basic recipe for Halloween Prop building. It can be used very thin with paper towels or tissue for texture. It can be kept very thick and used with newspaper to make an extremely hard durable finish. It can be brushed onto a surface when its thick to smooth out seams.

Basic Mache Recipe
1 c. Flour
1 c. Corn Starch
1 tbsp Salt (to deter mold)
1 1/2 c. Water
1 c. White Glue
In a bowl (that you don’t care too much for) combine flour and corn starch and salt. Add water and mix thoroughly. The batter will be thick. Add glue stirring to combine. Depending on the project I will sometimes water this down further.

Prepare your workspace

I sometimes use those cheap plastic party table coverings to cover my work area, or a plastic bag cut open.

Prepare your newspaper
Never cut the newspaper into strips. It leaves a hard edge which will not blend and will remain visible unless you sand down your project. Tearing paper leaves more fibers intact and makes for a smoother finish.

Prepare your prop or form
If using chicken wire, apply newsprint or masking tape, or both to the wire to give the mache something to hold onto. Whatever you use, make sure it is stable to ensure your mache does not warp as it dries.

How to apply mache
Take the newsprint from one end, and dip it into the mache mix. As you pull the mache back out, put it between the index and middle finger of your other hand. This will sort of squeegee off the excess mache mix, and you will have both sides of the mache coated.

Apply the strips in as much of a cross hatch pattern as possible to add strength to the shape. Only apply 2 to 3 coats at a time. If you do not allow sufficient drying time between applications your project will take a very long time to dry out and could mold.

After I have coated my project a few times, I leave it to dry. I set up fans to increase air flow, and when necessary I also add extra heat with a portable heater or a heat lamp, depending on the size of the project. *** Only add heat to the room, not directly to your project.

For finer detail use smaller pieces or use mache pulp. (see below)
For extra strength do many layers.
For smooth textures sand the final layer, or paint on a layer or two of thick Basic Mache.
For a textured finish apply different paper to the top layer or layers of the project. Try tissue or paper towel. Use a thinner consistency mache or use glue mache(see below), and paint it onto the surface, apply the thinner paper and paint over with more mache. You can gently push the paper or tissue to create a wrinkled effect.

Glue Mache

This mix is very effective when used with thin mediums such as tissue, paper towel or toilet paper. I have also used it on small projects using small pieces of newsprint. The ratio of glue to water will vary depending on your purpose. When combined with thin paper products this mix creates great texture. In general, I use this mix over top of Basic Mache, after I have achieved my form and strength.

Glue Mache Recipe
White Glue
Water
Water down the glue to the consistency desired. Apply mache with a brush to surface, apply paper, and brush over with more mache. Repeat. I usually only use this method on the surface of the prop when I need a desired texture.

Mache Pulp

This mix is more of a clay. It can be molded and shaped like clay. There may be better recipes out there then this one, again this is just the stuff I use, and one of my favorites. I use this recipe often.

Mache Pulp Recipe
Extra small paper shreds
Ground White Chalk
Glue and water

Mix together to the consistency you want. It keeps in a sealed container for a long time. The finer the paper shreds the finer the mix will be.

Related posts:

1. Zombie Crawler
2. Paper Skull
3. Halloween Tree